SimpleComponents

💡 Turn an LED on/off

This example demonstrates how to use the SimpleLed class to blink an LED connected to digital pin 9.

To use this example, you will need to connect an LED to digital pin 9 on your Arduino board. When you run the sketch, the LED will blink on and off at a rate of 1 second per blink.

🔧 Hardware Components

• Arduino board
• LED
• 220Ω resistor (optional)

🔌 Circuit Diagram

💻 Code

// Include the SimpleComponents Library
#include <SimpleComponents.h>

// You could also only import SimpleLed
// #include <SimpleLed.h> 

// Create a SimpleLed object
SimpleLed led(9);

void setup() {
  // Initialize the LED
  led.init();
}

void loop() {
  // Turn on the LED
  led.on();
  delay(1000);

  // Turn off the LED
  led.off();
  delay(1000);
}

🤝 Contribute to Examples

We welcome contributions to the examples in this library! If you find any mistakes or want to add more examples, please don’t hesitate to create a pull request.

This site is open source. Improve this page.